Siemens rangehood filter
Which grease and carbon filter each of the 8 Siemens rangehoods sold in Australia takes, with dated prices from 3 Australian sellers.
Bosch / Siemens / Neff metal grease filter 11062331 (342.8 x 312.8 x 8 mm)takes 11062331
Bosch / Siemens metal grease filter 11062243 (210 x 264.5 x 8 mm)takes 11062243
Bosch / Siemens metal grease filter 11062244 (414.5 x 210 x 8 mm)takes 11062244
Metal grease filter 11044429 (348.5 x 164 x 20 mm)takes 11044429
Bosch / Siemens metal grease filter 11066820 (264.5 x 210 x 8 mm)takes 11066820
Bosch / Siemens / Neff metal grease filter 11066211 (414.5 x 210 x 8 mm)takes 11066211
Bosch / Siemens / Neff cassette grease filter 11004996 (397.5 x 159.5 x 8 mm)takes 11004996
How to change your Siemens rangehood filter
Steps for the Bosch / Siemens / Neff metal grease filter 11062331 (342.8 x 312.8 x 8 mm) (11062331), the filter 2 Siemens models take.
- 1Switch the hood off and let it cool. Integrated design hoods (DBB, LJ, D99X): open the glass front fully. Slide-outs (DFS, DFM): pull the visor out. DLN hoods: pull the filter cover down slowly.
- 2Hold the grease filter from below with one hand so it cannot drop onto the cooktop, open the lock and tilt it down, then lift it out of its holders. Keep it level so grease does not drip.
- 3Soak it in hot soapy water and brush it clean, or put it loosely in the dishwasher on a programme of no more than 70 °C. Do not squeeze it.
- 4Rinse and let it drain. Light discolouration after the dishwasher is normal.
- 5Hook the filter back into its holders, fold it up and check the lock clicks. If it is torn or bent, fit a new one the same way. Reset the saturation indicator if your hood has one.
Different steps for Bosch / Siemens / Neff odour filter 00748732 (DHZ5316, LZ55651, Z5135X1) · Different steps for metal grease filter 11044429 (348.5 x 164 x 20 mm)
Reset the filter reminder
Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
Common questions
- What happens if I don't change the filter?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter reminder on a Siemens rangehood?
- Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
All 8 Siemens rangehoods we list, A to Z
Brand names describe compatibility only; FitMatch is independent of Siemens. Fitment sources are recorded on every model page.