The Siemens LD98WMM66 takes the Siemens metal grease filter 11044429 (348.5 x 164 x 20 mm) as its grease filter; Australian sellers list it from A$135.47 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your rangehood
Siemens LD98WMM66
Rangehood
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Not yours? Change
Takes the 11044429 grease filter
metal grease filter 11044429 (348.5 x 164 x 20 mm) · check the code printed on your old filter before ordering.
Your rangehood
Rangehood
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Takes the 11044429
Grease filter · check the code on your old filter.
Other Siemens rangehoods and their grease and carbon filters
The 11044429 fits the LD98WMM66 only. These Siemens models take a different grease filter:
GenuineGenuine Siemens
$135.47
Siemens Australia · 26 OctLowest genuine · Siemens Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Siemens. Compatible: another brand.Genuine is made by Siemens. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $135.47
Siemens Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Siemens Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it only if it is damaged; clean it about every two months.
After replacing: Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
How to change the grease filter in your Siemens LD98WMM66
Watch the guide or follow the steps.
- 1Let the downdraft cool. Press the filter button on the controls: the glass panel moves halfway down and the grease filter cartridges rise to the top.
- 2Lift the grease filters up and out of the cartridges. Do not bend them.
- 3Soak them in hot soapy water and brush them clean, or put them loosely in the dishwasher at no more than 70 °C. Do not squeeze them. Fit a new filter in place of a damaged one.
- 4Put the grease filters back into the cartridges and press the filter button again: the glass panel and the cartridges move down and the flap closes.
- 5Reset the saturation indicator.
Every number this part goes by
- Retail name:
- 11044429
Sellers list any of these; they are the same part.
About your Siemens LD98WMM66
Siemens rangehood — iQ700 downdraft hood 90 cm. Its grease filter is the metal grease filter 11044429 (348.5 x 164 x 20 mm), part 11044429.
Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.
Fits this Siemens model
Siemens1 model
Common questions
- Which grease filter fits the Siemens LD98WMM66?
- The Siemens LD98WMM66 takes the Siemens metal grease filter 11044429 (348.5 x 164 x 20 mm).
- Where can I buy the 11044429 in Australia?
- We track 1 Australian seller for the 11044429; the lowest listed price when we last checked was A$135.47 at Siemens Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 11044429 in a Siemens LD98WMM66?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter light?
- Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
Something looks wrong with the LD98WMM66 match? . Reports go to a person, not a bot.