The Siemens LJ69BET65 takes the Bosch / Siemens metal grease filter 11066820 (264.5 x 210 x 8 mm) as its grease filter; Australian sellers list it from A$37.70 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your rangehood
Siemens LJ69BET65
Rangehood
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Not yours? ChangeTakes the 11066820 grease filter
metal grease filter 11066820 (264.5 x 210 x 8 mm) · check the code printed on your old filter before ordering.
Your rangehood
Rangehood
Confirmed against Siemens's listConfirmed against Siemens's own compatibility list
Takes the 11066820
Grease filter · check the code on your old filter.
Other Siemens rangehoods and their grease and carbon filters
The 11066820 fits the LJ69BET65 and 2 other models. These Siemens models take a different grease filter:
GenuineGenuine Bosch
$37.70
Siemens Australia · 26 OctLowest genuine · Siemens Australia · checked 26 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Bosch. Compatible: another brand.Genuine is made by Bosch. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $37.70
Siemens Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Opens Siemens Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it only if it is damaged; clean it about every two months.
After replacing: Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
How to change the grease filter in your Siemens LJ69BET65
Watch the guide or follow the steps.
- 1Switch the hood off and let it cool. Integrated design hoods (DBB, LJ, D99X): open the glass front fully. Slide-outs (DFS, DFM): pull the visor out. DLN hoods: pull the filter cover down slowly.
- 2Hold the grease filter from below with one hand so it cannot drop onto the cooktop, open the lock and tilt it down, then lift it out of its holders. Keep it level so grease does not drip.
- 3Soak it in hot soapy water and brush it clean, or put it loosely in the dishwasher on a programme of no more than 70 °C. Do not squeeze it.
- 4Rinse and let it drain. Light discolouration after the dishwasher is normal.
- 5Hook the filter back into its holders, fold it up and check the lock clicks. If it is torn or bent, fit a new one the same way. Reset the saturation indicator if your hood has one.
Every number this part goes by
- Retail name:
- 11066820
Sellers list any of these; they are the same part.
About your Siemens LJ69BET65
Siemens rangehood — iQ700 Integrated Design Hood 60 cm. Its grease filter is the metal grease filter 11066820 (264.5 x 210 x 8 mm), part 11066820.
Where the model number is: Take out a grease filter: the rating plate with the model number is on the inside wall of the hood or on the fan housing. It is also in the manual and on the receipt.
Fits these 3 models
Bosch2 models
Siemens1 model
Common questions
- Which grease filter fits the Siemens LJ69BET65?
- The Siemens LJ69BET65 takes the Bosch / Siemens metal grease filter 11066820 (264.5 x 210 x 8 mm).
- Where can I buy the 11066820 in Australia?
- We track 2 Australian sellers for the 11066820; the lowest listed price when we last checked was A$37.70 at Siemens Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 11066820 in a Siemens LJ69BET65?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Grease builds up in the mesh and the fan pulls less air, so smoke and smells linger; a recirculating hood with a spent carbon filter blows the smell back into the kitchen.
- How do I reset the filter light?
- Hoods with a saturation indicator remind you to clean the grease filters. After cleaning, reset it: on many models switch the hood off, then press and hold the indicator button for about three seconds (see "Resetting the saturation indicator" in your manual).
Something looks wrong with the LJ69BET65 match? . Reports go to a person, not a bot.