Roborock robot vacuum filters, brushes and mop cloths by part number

The three-armed side brush that sweeps edges into the path of the main brush. One brush fits almost every S, Q and Qrevo robot; it is held by a single screw. Trim hair off it monthly and replace when the arms bend or wear short.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the side-brush timer under Maintenance in the Roborock app.

Fits 43 Roborock models: C10, E2, E3, E4, E4 Mop, E5, E5 Mop, Q5, Q5 DuoRoller+, Q5 Max+, Q5 Pro, Q5 Pro+ and 31 more.

The dock dust bag for the Qrevo family (Qrevo, MaxV, Master, S, C, L, Curv, Edge, 2 Pro), the Saros 10 / 10R / 20 / Z70 and the S8 MaxV Ultra / S8 Max Ultra docks (Roborock part 8.02.0238, three per pack).

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 21 Roborock models: Q7B+, Qrevo, Qrevo 2 Pro, Qrevo C, Qrevo C Pro, Qrevo Curv, Qrevo Curv 2 Flow, Qrevo Edge, Qrevo Edge 2, Qrevo Edge 2 Pro, Qrevo Edge C, Qrevo L and 9 more.

The split DuoDivide roller for the Qrevo Curv, Qrevo Edge and Saros robots. The gap in the middle sheds hair towards the ends so less wraps.

Change it every 12 months; 4 steps, no tools.

Fits 20 Roborock models: Qrevo 2 Pro, Qrevo C, Qrevo C Pro, Qrevo Curv, Qrevo Curv 2 Flow, Qrevo Curv S5X, Qrevo CurvX, Qrevo Edge, Qrevo Edge 2, Qrevo Edge 2 Pro, Qrevo Edge C, Qrevo Edge S5A and 8 more.

Dust bag for the S8 Pro Ultra, S8+, S7 MaxV Ultra, S7 Max Ultra, S7 Pro Ultra and the Q-series auto-empty docks (Q5+, Q5 Pro+, Q5 Max+, Q7+, Q7 Max+, Q7 M5+, Q8 Max+, Q10 S5+, Q10 X5+).

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 19 Roborock models: Q10 S5+, Q10 X5+, Q10V+, Q5 Max+, Q5 Pro+, Q5+, Q7 L5+, Q7 M5+, Q7 Max, Q7 Max+, Q7+, Q7B+ and 7 more.

Microfibre mop cloth for the Q5, Q7, Q8, S5, S6 and E-series robots. Velcros to the mop plate.

Change it every 6 months; 3 steps, no tools.

Fits 17 Roborock models: E2, E3, E4 Mop, E5 Mop, Q5 Pro, Q5 Pro+, Q7, Q7 Max, Q7 Max+, Q7+, Q8 Max, Q8 Max+ and 5 more.

The newer push-fit side brush for the Saros, Qrevo Curv, Qrevo Edge and Q10 robots. Not interchangeable with the screw-on brush used by older models.

Change it every 6 months; 3 steps, no tools.

Fits 17 Roborock models: Q10V+, Q7B, Q7T+, Qrevo 2 Pro, Qrevo C, Qrevo C Pro, Qrevo Curv, Qrevo Edge, Qrevo Edge 2, Qrevo Edge 2 Pro, Qrevo Edge C, Qrevo L and 5 more.

Washable filter for the S4, S5, S6 and E series, the Q5 and the C10. Same pleated panel clipped to the back of the dust bin.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 14 Roborock models: C10, E2, E3, E4, E5, Q5, Q5+, S4, S4 Max, S5, S5 Max, S6 and 2 more.

The all-rubber main roller used by the S7 MaxV, Q7 Max and Qrevo family. Hair wraps less than on a bristle brush but still needs cutting free every month; replace when the ribs wear flat.

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Roborock app.

Fits 13 Roborock models: Q7, Q7 Max, Qrevo, Qrevo MaxV, Qrevo Plus, Qrevo Pro, Qrevo S, QV 35A, QV 35S, S7, S7 Max Ultra, S7 MaxV and 1 more.

Rotating mop cloths for the Qrevo, Qrevo MaxV, Master, Slim, C / C Pro, L, Curv, Edge and EdgeC (Roborock part 8.02.0246, two pairs). They peel off the spinning discs; the dock washes them but they still wear.

Change it every 6 months; 3 steps, no tools.

Fits 10 Roborock models: Qrevo, Qrevo C, Qrevo C Pro, Qrevo Curv, Qrevo Edge, Qrevo Edge C, Qrevo L, Qrevo Master, Qrevo MaxV, Qrevo Slim.

The washable filter Roborock's Australian store lists for the Qrevo MaxV, Qrevo S / S Pro, Qrevo C / C Pro, Qrevo L / L Pro and the Qrevo Curv, Edge and EdgeC. Roborock part 8.02.0296, two per pack; rinse fortnightly, replace when it stays grey.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 10 Roborock models: Qrevo C, Qrevo C Pro, Qrevo Curv, Qrevo Edge, Qrevo Edge C, Qrevo L, Qrevo L Pro, Qrevo MaxV, Qrevo S, Qrevo S Pro.

Washable filter for the Saros 10R and Saros 20, and the Qrevo CurvX, EdgeT and QX Revo Ultra.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 10 Roborock models: Qrevo CurvX, Qrevo Edge 2, Qrevo Edge 2 Flow, Qrevo Edge 2 Pro, Qrevo EdgeT, QX Revo Ultra, S10 MaxV Ultra, Saros 10R, Saros 20, Saros 20 Sonic.

The washable filter that sits on the dust bin of the S7 and S8 families. Rinse it under the tap every couple of weeks and let it dry fully; replace it when it stays grey or the app's filter timer runs out.

Change it every 6 months; 4 steps, no tools.

After the change: In the Roborock app open Maintenance, tap the filter and choose Reset after fitting the new one.

Fits 9 Roborock models: S7, S7 Max Ultra, S7 MaxV, S7 MaxV Plus, S7 MaxV Ultra, S7+, S8, S8 Pro Ultra, S8+.

The VibraRise mop cloth for the S7 and S8 families. It Velcros to the vibrating mop plate; wash it after every mop run and replace when it frays or stops holding water evenly.

Change it every 6 months; 3 steps, no tools.

Fits 9 Roborock models: S7, S7 Max Ultra, S7 MaxV, S7 MaxV Plus, S7 MaxV Ultra, S7 Pro Ultra, S7+, S8, S8+.

Washable dust-bin filter for the Q7, Q7 Max, Q5 Pro / Q5 Pro+ and Q8 Max / Q8 Max+ (Roborock part 8.02.0134).

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 6 Roborock models: Q5 Pro, Q5 Pro+, Q7, Q7 Max, Q8 Max, Q8 Max+.

Washable filter Roborock lists for the Q7B / Q7B+, Q7T+, Q7 / Q7+ and Q7 Max+ (part 8.02.0443). Roborock's store also lists 8.02.0134 for the Q7 and Q7 Max+; either fits.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 6 Roborock models: Q7, Q7 Max+, Q7+, Q7B, Q7B+, Q7T+.

Mop cloth for the Q7B / Q7B+, Q7T+, Q8 and Q8+ (Roborock part 8.02.0442). Velcros to the mop plate.

Change it every 6 months; 3 steps, no tools.

Fits 5 Roborock models: Q7B, Q7B+, Q7T+, Q8, Q8+.

Round rotating mop pads for the Saros 10R, Saros 20, Saros Z70 and Qrevo Edge 2. They peel off the spinning discs; the dock washes them, but they still wear.

Change it every 6 months; 3 steps, no tools.

Fits 5 Roborock models: Qrevo 2 Pro, Qrevo Edge 2, Saros 10R, Saros 20, Saros Z70.

Mop cloth Roborock lists for the Q10V+ and the S8 Pro / S8 Pro+ / S8 Pro Ultra (part 8.02.0437). Velcros to the mop plate.

Change it every 6 months; 3 steps, no tools.

Fits 4 Roborock models: Q10V+, S8 Pro, S8 Pro Ultra, S8 Pro+.

Washable filter for the Qrevo Master, Qrevo Slim and Saros Z70.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 4 Roborock models: Qrevo Curv 2 Flow, Qrevo Master, Qrevo Slim, Saros Z70.

Rotating mop cloths Roborock lists for the Qrevo Curv, Edge and EdgeC, the Q10V+ and the S8 Pro (part 8.02.0383). The store also lists 8.02.0246 for the Curv / Edge / EdgeC.

Change it every 6 months; 3 steps, no tools.

Fits 3 Roborock models: Qrevo Curv, Qrevo Edge, Qrevo Edge C.

Mop cloths for the Qrevo CurvX, Qrevo EdgeT and QX Revo Ultra.

Change it every 6 months; 3 steps, no tools.

Fits 3 Roborock models: Qrevo CurvX, Qrevo EdgeT, QX Revo Ultra.

Washable filter for the S8 MaxV Ultra and S8 Max Ultra (Roborock part 8.02.0320). Two per pack.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits 2 Roborock models: S8 Max Ultra, S8 MaxV Ultra.

The two-piece rubber main brush (red and grey) for the S8 MaxV Ultra and S8 Max Ultra (Roborock part 8.02.0322).

Change it every 12 months; 4 steps, no tools.

After the change: Reset the main-brush timer under Maintenance in the Roborock app.

Fits 2 Roborock models: S8 Max Ultra, S8 MaxV Ultra.

Rotating mop cloths for the Qrevo L and Qrevo L Pro (Roborock part 8.02.0467, four per pack).

Change it every 6 months; 3 steps, no tools.

Fits 2 Roborock models: Qrevo L, Qrevo L Pro.

Mop cloths for the Q10 S5 and Q10 S5+.

Change it every 6 months; 3 steps, no tools.

Fits 2 Roborock models: Q10 S5, Q10 S5+.

Washable filter for the Q7 M5 and Q7 M5+.

Change it every 6 months; 4 steps, no tools.

Fits 2 Roborock models: Q7 M5, Q7 M5+.

Dust bag for the S7+ and S7 MaxV Plus auto-empty dock. Roborock rates one bag at up to seven weeks of dust; the app tells you when it is full.

Change it every 2 months; 3 steps, no tools.

After the change: The dock detects a new bag; no reset needed.

Fits 2 Roborock models: S7 MaxV Plus, S7+.

Mop cloths for the Q10 X5 and Q10 X5+.

Change it every 6 months; 3 steps, no tools.

Fits 2 Roborock models: Q10 X5, Q10 X5+.

The VibraRise 2.0 mop cloth for the Saros 10 (Roborock part 8.02.0399). The Saros 10 also has a small Edgewise mop (8.02.0402) that is sold separately.

Change it every 6 months; 3 steps, no tools.

Fits the Saros 10.

Rotating mop cloths for the Qrevo Edge 2 Pro (Roborock part 8.02.0418, four per pack).

Change it every 6 months; 3 steps, no tools.

Fits the Qrevo Edge 2 Pro.

The antibacterial roller mop for the Qrevo Curv 2 Flow (Roborock part 8.02.0487). The Curv 2 Flow mops with a roller rather than pads, so it takes this part only.

Change it every 6 months; 3 steps, no tools.

Fits the Qrevo Curv 2 Flow.

The grey-and-yellow push-fit side brush for the Qrevo Curv 2 Flow (Roborock part 8.02.0490). Not the same brush as other Qrevo models.

Change it every 6 months; 3 steps, no tools.

Fits the Qrevo Curv 2 Flow.

The washable filter for the original Qrevo. Roborock notes this one is not shared with the other Qrevo-series models, so check the model name on the underside label.

Change it every 6 months; 4 steps, no tools.

After the change: Reset the filter timer under Maintenance in the Roborock app.

Fits the Qrevo.

Main brush for the Saros Z70.

Change it every 12 months; 4 steps, no tools.

Fits the Saros Z70.

Washable filter for the Saros 10. Listed by Australian sellers; not yet checked against Roborock's own list.

Change it every 6 months; 4 steps, no tools.

Fits the Saros 10.