The Bissell CrossWave OmniForce Edge 3999F takes the Bissell FreshStart Filter for CrossWave OmniForce Edge, EdgeFind and Edge Cordless (part 1640066) as its filter; replace it every 3 months; Australian sellers list it from A$10.00 each as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your hard floor cleaner
Bissell CrossWave OmniForce Edge 3999F
Hard floor cleaner
Confirmed against Bissell's listConfirmed against Bissell's own compatibility list
Not yours? ChangeSave it · remind me every 3 months
Takes the 1640066 filter
FreshStart Filter for CrossWave OmniForce Edge, EdgeFind and Edge Cordless · replace every 3 months · check the code printed on your old filter before ordering.
Your hard floor cleaner
Hard floor cleaner
Confirmed against Bissell's listConfirmed against Bissell's own compatibility list
Takes the 1640066
Filter · every 3 months · check the code on your old filter.
Other Bissell hard floor cleaners that take the 1640066
GenuineGenuine Bissell
$18.95
Bissell Australia · 2 NovLowest genuine · Bissell Australia · checked 2 Nov
CompatibleCompatible option
$10.00 each
4-pack $39.99
Amazon AU · 28 OctAmazon AU · checked 28 Oct
Check sellerCheck seller details
Genuine: made by Bissell. Compatible: another brand.Genuine is made by Bissell. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest compatibleLowest compatible price · $10.00 each · 4-pack $39.99
Amazon AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Other parts this hard floor cleaner takes
- Bissell ZeroGap Multi-Surface Brush Roll for CrossWave OmniForce Edge, EdgeFind and Edge CordlessOpen Bissell Australia$17.95
The roller. Separate from the filter. Replace every 3 months.
Compare 2 sellers - Bissell Accessory Kit for CrossWave OmniForce Edge (ZeroGap brush roll and filter)Open The Good Guys$39.00
The roller. Bissell accessory kit: one ZeroGap brush roll and one filter. Separate from the filter. Replace every 3 months.
Compare 2 sellers
Compare 2 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your filter is due — it's every 3 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the filter in your Bissell CrossWave OmniForce Edge 3999F
Watch the guide or follow the steps.
- 1Turn the machine off and take it off the docking station or tray.
- 2Press the dirty water tank release and pull the tank out by its handle.
- 3Lift off the top of the tank by the recessed areas beside the filter and empty the tank.
- 4Take the filter and its screen off the tank lid.
- 5Fit the new filter, refit the tank top, then insert the bottom of the tank first and tilt it in until it clicks.
Every number this part goes by
- Retail name:
- 1640066
Sellers list any of these; they are the same part.
About your Bissell CrossWave OmniForce Edge 3999F
Bissell vacuum cleaner, hard floor cleaner — CrossWave OmniForce Edge. Its filter is the FreshStart Filter for CrossWave OmniForce Edge, EdgeFind and Edge Cordless, part 1640066, changed every 3 months.
Also in this hard floor cleaner:
- Bissell ZeroGap Multi-Surface Brush Roll for CrossWave OmniForce Edge, EdgeFind and Edge Cordless (every 3 months).
- Bissell Accessory Kit for CrossWave OmniForce Edge (ZeroGap brush roll and filter) (every 3 months). Bissell accessory kit: one ZeroGap brush roll and one filter.
Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.
Fits these 4 Bissell models
Bissell4 models
CrossWave Edge Cordless 4328F, CrossWave EdgeFind 4136F. Bissell Australia also lists FreshStart filter 1640066 for this model.
Common questions
- Which filter fits the Bissell CrossWave OmniForce Edge 3999F?
- The Bissell CrossWave OmniForce Edge 3999F takes the Bissell FreshStart Filter for CrossWave OmniForce Edge, EdgeFind and Edge Cordless (part 1640066). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Bissell CrossWave OmniForce Edge 3999F?
- Every 3 months. It works less well as the filter fills up, so it's worth doing on time.
- Where can I buy the 1640066 in Australia?
- We track 2 Australian sellers for the 1640066; the lowest listed price when we last checked was A$10.00 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the 1640066 in a Bissell CrossWave OmniForce Edge 3999F?
- No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset: the maker's manual describes no replacement reminder for this part.
Something looks wrong with the CrossWave OmniForce Edge 3999F match? . Reports go to a person, not a bot.