Milwaukee vacuum filter

1. 1Take both battery packs out of the vacuum.
2. 2Release the tank latches, lift off the motor head and place it upside down on a flat surface.
3. 3Turn the filter anticlockwise and pull it off the motor head and float cage. Empty the debris from the tank.
4. 4Slide the new filter over the float cage, line its tabs up with the notches in the motor head and turn it clockwise to lock.
5. 5Put the motor head back on the tank and close both latches. Use this filter for dry pick-up only.

Different steps for wet/dry vacuum wet foam filter 49901990 (23 L, 34 L, 45 L) · Different steps for HEPA filter 49901900A for M18WDV, M18FPOVCL and M12FWDVL · Different steps for foam wet filter 49902015 for M18WDV, M18FPOVCL and M12FWDVL · Different steps for fleece dust bags 4932478762 for M12FWDVL and M18FPOVCL (3 pack) · Different steps for M18 FUEL 23 L wet/dry vac fleece bags 49901979 (5 pack) · Different steps for fleece dust bags 49901969 for M18ONEF2POVC34M0 (5 pack) · Different steps for M18 FUEL 34 L wet/dry vac fleece bags 49901989 (5 pack) · Different steps for M18 FUEL 45 L wet/dry vac fleece bags 49901999 (5 pack) · Different steps for HEPA filters 49901968 for M18ONEF2POVC34M0 (set of 2)