FitMatch

The Milwaukee M18FVC34L0 takes the Milwaukee M18 FUEL wet/dry vac HEPA filter 4932479805 (23 L, 34 L, 45 L) as its filter; Australian sellers list it from A$70.40 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your vacuum cleaner

Wet and dry vacuum

Confirmed against Milwaukee's list

Not yours? Change
4932479805

Takes the 4932479805

Filter · check the code on your old filter.

Other Milwaukee vacuum cleaners that take the 4932479805

Genuine

$70.40

Sydney Tools · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Milwaukee. Compatible: another brand.

Lowest price · $70.40

Sydney Tools. Every seller we track is listed below. Some links earn us a commission.

Open Sydney Tools

This vacuum cleaner also takes a dust bag

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Sydney ToolsGenuine · checked 28 Oct$70.40Open
Open cheapest seller · $70.40

Opens Sydney Tools in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged or no longer comes clean; Milwaukee gives no interval and says it can be dry-cleaned, washed and reused.

After replacing: No reset.

How to change the filter in your Milwaukee M18FVC34L0

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Take both battery packs out of the vacuum.
  2. 2Release the tank latches, lift off the motor head and place it upside down on a flat surface.
  3. 3Turn the filter anticlockwise and pull it off the motor head and float cage. Empty the debris from the tank.
  4. 4Slide the new filter over the float cage, line its tabs up with the notches in the motor head and turn it clockwise to lock.
  5. 5Put the motor head back on the tank and close both latches. Use this filter for dry pick-up only.
Every number this part goes by
Retail name:
4932479805

Sellers list any of these; they are the same part.

About your M18FVC34L0

Milwaukee vacuum cleaner, wet and dry vacuum — M18 FUEL 34 L wet/dry vacuum. Its filter is the M18 FUEL wet/dry vac HEPA filter 4932479805 (23 L, 34 L, 45 L), part 4932479805.

Other filters the maker lists for this vacuum cleaner: Milwaukee wet/dry vacuum wet foam filter 49901990 (23 L, 34 L, 45 L). Foam wet filter: use it instead of the HEPA filter when you vacuum liquids, Milwaukee says; it is sold separately.

Also in this vacuum cleaner: Milwaukee M18 FUEL 34 L wet/dry vac fleece bags 49901989 (5 pack).

Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.

Fits these 4 Milwaukee models
Common questions
Which filter fits the Milwaukee M18FVC34L0?
The Milwaukee M18FVC34L0 takes the Milwaukee M18 FUEL wet/dry vac HEPA filter 4932479805 (23 L, 34 L, 45 L).
Where can I buy the 4932479805 in Australia?
We track 1 Australian seller for the 4932479805; the lowest listed price when we last checked was A$70.40 at Sydney Tools. Prices are re-checked daily and dated on this page.
How do I fit the 4932479805 in a Milwaukee M18FVC34L0?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Suction drops and the vacuum may cut out on a blocked filter.
Is there anything to reset afterwards?
No reset.

Something looks wrong with the M18FVC34L0 match? . Reports go to a person, not a bot.