FitMatch

The AEG LF8584M8O takes the AEG LF8584M8O drain pump filter 140175257025 as its pump filter; Australian sellers list it from A$29.52 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

AEG LF8584M8O

Your front loader

Front loader washing machine

Confirmed against AEG's list

Not yours? Change

Takes the 140175257025

Pump filter · check the code on your old filter.

Other AEG models and their pump filters

The 140175257025 fits the LF8584M8O only. These AEG models take a different pump filter:

Genuine

$29.52

AEG Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by AEG. Compatible: another brand.

Lowest price · $29.52

AEG Australia. Out of stock when we checked. Every seller we track is listed below. Some links earn us a commission.

Open AEG Australia

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

AEG AustraliaGenuine · checked 28 Oct · out of stock when checked$29.52Open
Electrolux AustraliaGenuine · checked 28 Oct · out of stock when checked$29.52Open
Open cheapest seller · $29.52

Opens AEG Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is cracked or damaged or no longer seals; AEG says to clean the drain pump filter twice a year, and when the machine does not drain or shows a drain alarm.

After replacing: No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.

How to change the pump filter in your AEG LF8584M8O

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Switch off and unplug the machine, and wait until the water inside has cooled. Never remove the filter while the machine is running.
  2. 2Open the pump cover at the bottom front, put a shallow bowl under it and keep a towel nearby.
  3. 3Loosen the filter anticlockwise a little and let the water run out; tighten it to empty the bowl and repeat until no more water comes out.
  4. 4Unscrew the filter anticlockwise, remove fluff and objects, and check the pump impeller can turn.
  5. 5Rinse the filter under the tap, screw it back in clockwise until it is tight so it does not leak, and close the cover.
Every number this part goes by
Retail name:
140175257025

Sellers list any of these; they are the same part.

About your LF8584M8O

AEG washing machine, front loader washing machine — Front load washing machine (AEG). Its pump filter is the LF8584M8O drain pump filter 140175257025, part 140175257025.

Where the model number is: On a top loader the rating plate with the model is inside the lid or on the back; on a front loader, around the door opening or on the back. Switch the machine off at the wall before you take a filter out.

Fits this AEG model

AEG1 model

Common questions
Which pump filter fits the AEG LF8584M8O?
The AEG LF8584M8O takes the AEG LF8584M8O drain pump filter 140175257025.
Where can I buy the 140175257025 in Australia?
We track 2 Australian sellers for the 140175257025; the lowest listed price when we last checked was A$29.52 at AEG Australia. Prices are re-checked daily and dated on this page.
How do I fit the 140175257025 in an AEG LF8584M8O?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A cracked or damaged pump filter can leak or let small objects through to the pump. A blocked one is cleaned, not changed: the machine stops draining until it is.
Is there anything to reset afterwards?
No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.

Something looks wrong with the LF8584M8O match? . Reports go to a person, not a bot.