The Electrolux EWF1090 takes the Electrolux front loader drain pump filter insert 1321368118 as its pump filter; Australian sellers list it from A$40.99 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your front loader
Electrolux EWF1090
Front loader washing machine
Confirmed against Electrolux's listConfirmed against Electrolux's own compatibility list
Not yours? Change
Takes the 1321368118 pump filter
front loader drain pump filter insert 1321368118 · check the code printed on your old filter before ordering.
Your front loader
Front loader washing machine
Confirmed against Electrolux's listConfirmed against Electrolux's own compatibility list
Takes the 1321368118
Pump filter · check the code on your old filter.
Other Electrolux front loaders that take the 1321368118
GenuineGenuine Electrolux
$40.99
Electrolux Australia · 28 OctLowest genuine · Electrolux Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Electrolux. Compatible: another brand.Genuine is made by Electrolux. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $40.99
Electrolux Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 3 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
1 seller
Opens Electrolux Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is cracked or damaged or no longer seals; clean it when the machine does not drain.
After replacing: No reset needed.
How to change the pump filter in your Electrolux EWF1090
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch off and unplug the machine, and let any hot water cool before you start.
- 2Put a towel down and a shallow tray in front of the machine, then open the small door at the bottom front.
- 3Let the water out slowly into the tray, emptying the tray as it fills, until no more comes out.
- 4Unscrew the filter anticlockwise, take out the insert, remove lint and objects, and rinse it under the tap.
- 5Refit the insert, screw the filter back in clockwise until it is tight so it does not leak, and close the door.
- 6If your machine's filter sits differently, its user manual shows where it is and how it comes out.
Every number this part goes by
- Retail name:
- 1320713108
- Retail name:
- 1321368118
Sellers list any of these; they are the same part.
About your Electrolux EWF1090
Electrolux washing machine, front loader washing machine — Front load washing machine (Electrolux). Its pump filter is the front loader drain pump filter insert 1321368118, part 1321368118.
Where the model number is: On a top loader the rating plate with the model is inside the lid or on the back; on a front loader, around the door opening or on the back. Switch the machine off at the wall before you take a filter out.
Fits these 15 models
Common questions
- Which pump filter fits the Electrolux EWF1090?
- The Electrolux EWF1090 takes the Electrolux front loader drain pump filter insert 1321368118. Compatible filters made to the same specification also fit.
- Where can I buy the 1321368118 in Australia?
- We track 3 Australian sellers for the 1321368118; the lowest listed price when we last checked was A$40.99 at Electrolux Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 1321368118 in an Electrolux EWF1090?
- 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A cracked or damaged pump filter can leak or let small objects through to the pump. A blocked one is cleaned, not changed: the machine stops draining until it is.
- Is there anything to reset afterwards?
- No reset needed.
Something looks wrong with the EWF1090 match? . Reports go to a person, not a bot.