FitMatch

The Zodiac Ei 25 takes the Zodiac Ei 25 (Mid) electrode W197621 as its cell; Australian sellers list it from A$1150.00 as of 31 October 2026. This fit is not yet confirmed against the manufacturer's list.

Your salt chlorinator

Salt chlorinator

Not confirmed by Zodiac — check your old part

W197621

Takes the W197621

Cell · check the code on your old part.

Electrode only: it fits your existing cell housing under the retaining ring.

Other Zodiac salt chlorinators and their cells

The W197621 fits the Ei 25 only. These Zodiac models take a different cell:

Genuine

$1150.00

Pool & Spa Warehouse · 31 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Zodiac. Compatible: another brand.

Lowest price · $1150.00

Pool & Spa Warehouse. Every seller we track is listed below. Some links earn us a commission.

Open Pool & Spa Warehouse

Compare 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $1150.00

Opens Pool & Spa Warehouse in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the controller shows Check Cell and cleaning the electrode in mild acid does not clear it, Zodiac says; fit the electrode made for your model.

After replacing: No reset needed. Once water flows through the new cell the controller reads it again; set the output again if you changed it while the cell was out.

How to change the cell in your Zodiac Ei 25

Watch the guide or follow the steps.

Salt Chlorine Generator Troubleshooting · ZodiacAustralia (official)
  1. 1Switch off the filter pump and the chlorinator, and close any valves either side of the cell.
  2. 2Unplug the cell terminal cap (the cell head and plug).
  3. 3Unscrew the retaining ring and lift the old electrode out of the cell housing.
  4. 4Fit the new electrode with its O-ring in place and screw the retaining ring back on by hand. Use the electrode made for your model.
  5. 5Refit the cell head and plug, reset the valves and switches, and turn the pump and chlorinator back on.
Every number this part goes by
Retail name:
W197621

Sellers list any of these; they are the same part.

About your Ei 25

Zodiac salt chlorinator — Ei salt chlorinator. Its cell is the Ei 25 (Mid) electrode W197621, part W197621.

Where the model number is: The model and output are on the label on the power supply or control box near the pump. Switch the chlorinator and pump off at the power point before you touch the cell.

Fits this Zodiac model

Zodiac1 model

Electrode only: it fits your existing cell housing under the retaining ring.

Common questions
Which cell fits the Zodiac Ei 25?
The Zodiac Ei 25 takes the Zodiac Ei 25 (Mid) electrode W197621. Electrode only: it fits your existing cell housing under the retaining ring.
Where can I buy the W197621 in Australia?
We track 2 Australian sellers for the W197621; the lowest listed price when we last checked was A$1150.00 at Pool & Spa Warehouse. Prices are re-checked daily and dated on this page.
How do I fit the W197621 in a Zodiac Ei 25?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A worn cell makes too little chlorine, so the water turns green or cloudy, and turning the output up only wears it faster.
Is there anything to reset afterwards?
No reset needed. Once water flows through the new cell the controller reads it again; set the output again if you changed it while the cell was out.

Something looks wrong with the Ei 25 match? . Reports go to a person, not a bot.