FitMatch
Zip MicroPurity 0.2 micron filter 93701 (size 1, residential)

Filtered water tap water filter

Zip MicroPurity 0.2 micron filter 93701 (size 1, residential)

93701

Fits 19 models · replace every 12 months

Wrong part, or your model missing? Tell us. A person checks every report.

Genuine

$195.00

Amazon AU · 26 Oct

Compatible

$80.00

Amazon AU · 26 Oct

Check seller

Genuine: made by Zip. Compatible: another brand. Check certification on the seller's page.

Lowest compatible · $80.00

Amazon AU. Compare with genuine below. Some links earn us a commission.

Open Amazon AU

Compare 7 listings from 5 sellers

AUD, before delivery. Each price shows when it was checked.

Amazon AUCompatible · checked 26 Oct$80.00Open
eBay AUCompatible · checked 26 Oct$89.95Open
Amazon AUGenuine · checked 26 Oct$195.00Open
eBay AUGenuine · checked 26 Oct$198.00Open
Cass BrothersGenuine · checked 6 Nov$199.00Open
Open cheapest seller · $80.00

Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the 93701 water filter

Watch the guide or follow the steps.

How to change the filter on a HydroTap G5 Command Centre · ZipWater (official)
  1. 1Have a bucket and a towel ready. Open the filter door on the front of the command centre under the sink.
  2. 2Start Filter flush on the screen, which shuts off the water. Put the flush line in the bucket and open and close its tap to release the pressure.
  3. 3Put the towel under the filter. Turn the cartridge a quarter turn to the left and pull it straight down; some water will drip.
  4. 4Unpack the new 93701, take off the sanitary cap and write today's date on the label. Do not touch the O-rings.
  5. 5Wet the O-rings with tap water, push the cartridge up into the head and turn it a quarter turn to the right until it stops.
  6. 6Open the flush line's tap and run the flush (about 10 litres over 2 minutes). Close the tap and put the line back.
  7. 7Go to Filter reset on the screen and reset the internal filter, then close the door.
Every number this part goes by
Retail name:
1Z-LS
Retail name:
93701
Retail name:
93701-BOX

Sellers list any of these; they are the same part.

Will it fit your appliance?

Type your model number and we'll check it against the makers' lists.

Fits these 19 Zip models

HydroTap G4 All-in-One, HydroTap G4 Arc, HydroTap G4 Classic, HydroTap G4 Cube, HydroTap G4 Elite, MT2787. For G4 units made after February 2017, which Zip says take 93701. These units have no red release lever.

Common questions
What does the 93701 fit?
The Zip MicroPurity 0.2 micron filter 93701 (size 1, residential) fits 19 Zip models, including the 3 Way Filtered Mixer Tap, 94552 and ChillTap. Every one is listed on this page. Compatible filters made to the same specification also fit.
How often should I replace the 93701?
Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
Where can I buy the 93701 in Australia?
We track 5 Australian sellers for the 93701; the lowest listed price when we last checked was A$80.00 at Amazon AU. Prices are re-checked daily and dated on this page.
How do I fit the 93701?
No tools, a few minutes: 7 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
How do I reset the reminder?
On a HydroTap, open Filter reset on the command centre screen after the flush and reset the internal filter counter. A ChillTap, Filter Tap or mixer has its own guide.

Something looks wrong with the 93701 match? . Reports go to a person, not a bot.