The Zip HydroTap G4 Arc takes the Zip GlobalPlus 0.2 micron filter cartridge 91290 (G4 HydroTap) as its water filter; replace it every 12 months; Australian sellers list it from A$74.95 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your filtered water tap
Zip HydroTap G4 Arc
Tap or under-sink system
Confirmed against Zip's listConfirmed against Zip's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the 91290 water filter
GlobalPlus 0.2 micron filter cartridge 91290 (G4 HydroTap) · replace every 12 months · check the code printed on your old filter before ordering.
HydroTaps made before February 2017 take 91290 (it replaces 91291). A G4 made after then may take 93701, so check the code on your current cartridge.
Your filtered water tap
Tap or under-sink system
Confirmed against Zip's listConfirmed against Zip's own compatibility list
Takes the 91290
Water filter · every 12 months · check the code on your old filter.
HydroTaps made before February 2017 take 91290 (it replaces 91291). A G4 made after then may take 93701, so check the code on your current cartridge.
Other Zip filtered water taps that take the 91290
GenuineGenuine Zip
$199.95
eBay AU · 26 OctLowest genuine · eBay AU · checked 26 Oct
CompatibleCompatible option
$74.95
eBay AU · 26 OcteBay AU · checked 26 Oct
Check sellerCheck seller details
Genuine: made by Zip. Compatible: another brand. Check certification on the seller's page.Genuine is made by Zip. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest compatibleLowest compatible price · $74.95
eBay AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 9 listings from 4 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
4 listings from 3 sellers
Genuine Zip
5 listings from 4 sellers
Opens eBay AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the water filter in your Zip HydroTap G4 Arc
Watch the guide or follow the steps.
- 1Have a bucket and a cloth ready. On the screen go to Menu > Installation > Filter Flush, then open the filter door on the front of the command centre.
- 2Find the flush line behind the cartridge, put its end in the bucket and turn the stop cock on and off quickly to release the pressure.
- 3Hold the cartridge, press the red lever at the top right (units made after 2017 have no lever), turn it a quarter turn to the left and pull it down.
- 4Write today's date on the new 91290, wet the O-rings, push it up into the head and turn it a quarter turn right so the label faces forward.
- 5Open the stop cock, press Start and run at least 10 litres through, then close the stop cock and press Stop.
- 6Press the back arrow, then Filter reset > Internal filter to reset the counters.
Every number this part goes by
- Retail name:
- 91290
- Replaces:
- 91291
Sellers list any of these; they are the same part.
About your Zip HydroTap G4 Arc
Zip filtered water tap, tap or under-sink system — HydroTap G4 Arc (2014–2017). Its water filter is the GlobalPlus 0.2 micron filter cartridge 91290 (G4 HydroTap), part 91290, changed every 12 months.
Other water filters the maker lists for this filtered water tap: Zip MicroPurity 0.2 micron filter 93701 (size 1, residential) (every 12 months). For G4 units made after February 2017, which Zip says take 93701. These units have no red release lever.
Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.
Fits these 6 Zip models
Zip6 models
HydroTaps made before February 2017 take 91290 (it replaces 91291). A G4 made after then may take 93701, so check the code on your current cartridge.
Common questions
- Which water filter fits the Zip HydroTap G4 Arc?
- The Zip HydroTap G4 Arc takes the Zip GlobalPlus 0.2 micron filter cartridge 91290 (G4 HydroTap). HydroTaps made before February 2017 take 91290 (it replaces 91291). A G4 made after then may take 93701, so check the code on your current cartridge. Compatible filters made to the same specification also fit.
- How often should I replace the water filter in my Zip HydroTap G4 Arc?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the 91290 in Australia?
- We track 4 Australian sellers for the 91290; the lowest listed price when we last checked was A$74.95 at eBay AU. Prices are re-checked daily and dated on this page.
- How do I fit the 91290 in a Zip HydroTap G4 Arc?
- No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- How do I reset the reminder?
- After the flush, go to Menu > Installation > Filter reset and press Internal filter; the filter percentage on the home screen goes back to 100%.
Something looks wrong with the HydroTap G4 Arc match? . Reports go to a person, not a bot.