The Zip HydroTap MiniBoil takes the Zip MicroPurity 0.2 micron filter 93701 (size 1, residential) as its water filter; replace it every 12 months; Australian sellers list it from A$80.00 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your filtered water tap
Zip HydroTap MiniBoil
Tap or under-sink system
Confirmed against Zip's listConfirmed against Zip's own compatibility list
Not yours? ChangeSave it · remind me every 12 months
Takes the 93701 water filter
MicroPurity 0.2 micron filter 93701 (size 1, residential) · replace every 12 months · check the code printed on your old filter before ordering.
Your filtered water tap
Tap or under-sink system
Confirmed against Zip's listConfirmed against Zip's own compatibility list
Takes the 93701
Water filter · every 12 months · check the code on your old filter.
Other Zip filtered water taps that take the 93701
GenuineGenuine Zip
$195.00
Amazon AU · 26 OctLowest genuine · Amazon AU · checked 26 Oct
CompatibleCompatible option
$80.00
Amazon AU · 26 OctAmazon AU · checked 26 Oct
Check sellerCheck seller details
Genuine: made by Zip. Compatible: another brand. Check certification on the seller's page.Genuine is made by Zip. Compatible is made by another brand. Check the seller's certification details before choosing.
Lowest compatibleLowest compatible price · $80.00
Amazon AU. Compare with genuine below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 7 listings from 5 sellers
AUD, before delivery. Each price shows when it was checked.
Compatible options
2 sellers
Genuine Zip
5 sellers
Opens Amazon AU in a new tab. Their page is the source of truth for price, delivery and returns.
Not due yet?
Get a nudge when your water filter is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.
How to change the water filter in your Zip HydroTap MiniBoil
Watch the guide or follow the steps.
- 1Have a bucket and a towel ready. Open the filter door on the front of the command centre under the sink.
- 2Start Filter flush on the screen, which shuts off the water. Put the flush line in the bucket and open and close its tap to release the pressure.
- 3Put the towel under the filter. Turn the cartridge a quarter turn to the left and pull it straight down; some water will drip.
- 4Unpack the new 93701, take off the sanitary cap and write today's date on the label. Do not touch the O-rings.
- 5Wet the O-rings with tap water, push the cartridge up into the head and turn it a quarter turn to the right until it stops.
- 6Open the flush line's tap and run the flush (about 10 litres over 2 minutes). Close the tap and put the line back.
- 7Go to Filter reset on the screen and reset the internal filter, then close the door.
Every number this part goes by
- Retail name:
- 1Z-LS
- Retail name:
- 93701
- Retail name:
- 93701-BOX
Sellers list any of these; they are the same part.
About your Zip HydroTap MiniBoil
Zip filtered water tap, tap or under-sink system — HydroTap MiniBoil. Its water filter is the MicroPurity 0.2 micron filter 93701 (size 1, residential), part 93701, changed every 12 months.
Where the model number is: On a boiling or chilled water tap the model is on the label on the unit under the bench, not on the tap itself. On an under-sink system it is on the filter head or housing; the cartridge code is printed on the old cartridge.
Fits these 19 Zip models
Zip19 models
- 3 Way Filtered Mixer Tap
- 94552
- ChillTap
- HydroTap G5 Arc Plus
- HydroTap G5 Celsius All-In-One Arc
- HydroTap G5 Celsius Arc
- HydroTap G5 Celsius Plus All-In-One
- HydroTap G5 Celsius Plus All-In-One Pull-Out
- HydroTap G5 Classic Plus
- HydroTap G5 Cube
- HydroTap G5 Cube Plus
- HydroTap G5 Elite Plus
- HydroTap MiniBoil
- HydroTap G4 All-in-One
- HydroTap G4 Arc
- HydroTap G4 Classic
- HydroTap G4 Cube
- HydroTap G4 Elite
- MT2787
HydroTap G4 All-in-One, HydroTap G4 Arc, HydroTap G4 Classic, HydroTap G4 Cube, HydroTap G4 Elite, MT2787. For G4 units made after February 2017, which Zip says take 93701. These units have no red release lever.
Common questions
- Which water filter fits the Zip HydroTap MiniBoil?
- The Zip HydroTap MiniBoil takes the Zip MicroPurity 0.2 micron filter 93701 (size 1, residential). Compatible filters made to the same specification also fit.
- How often should I replace the water filter in my Zip HydroTap MiniBoil?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the 93701 in Australia?
- We track 5 Australian sellers for the 93701; the lowest listed price when we last checked was A$80.00 at Amazon AU. Prices are re-checked daily and dated on this page.
- How do I fit the 93701 in a Zip HydroTap MiniBoil?
- No tools, a few minutes: 7 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- The carbon stops reducing chlorine taste and odour and the flow from the tap slows as the cartridge clogs; a boiling-water tap with a scale-reducing filter builds scale in its tank faster.
- How do I reset the reminder?
- On a HydroTap, open Filter reset on the command centre screen after the flush and reset the internal filter counter. A ChillTap, Filter Tap or mixer has its own guide.
Something looks wrong with the HydroTap MiniBoil match? . Reports go to a person, not a bot.