FitMatch

The Miele TWR780WP takes the Miele T1 fluff filter (door opening) 10762350 as its lint filter; Australian sellers list it from A$106.91 as of 29 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Miele TWR780WP

Your dryer

Clothes dryer

Confirmed against Miele's list

Not yours? Change
10762350

Takes the 10762350

Lint filter · check the code on your old filter.

Other Miele dryers that take the 10762350

Genuine

$106.91

Miele Australia · 29 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by Miele. Compatible: another brand.

Lowest price · $106.91

Miele Australia. Every seller we track is listed below. Some links earn us a commission.

Open Miele Australia

This dryer also takes a foam filter

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Miele AustraliaGenuine · checked 29 Oct$106.91Open
Open cheapest seller · $106.91

Opens Miele Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is damaged; clean the fluff filters after every drying cycle.

After replacing: No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

How to change the lint filter in your Miele TWR780WP

Watch the guide or follow the steps.

How to clean the filters of your Miele T1 dryer · Miele Canada (official)
  1. 1Take out the fragrance flacon if one is fitted, open the door and pull the upper fluff filter forwards to remove it.
  2. 2Remove the fluff from the surface of all the fluff filters and the perforated laundry deflector. A vacuum cleaner lets you do it without touching the fluff.
  3. 3For a thorough clean, turn the yellow dial on the lower fluff filter, hold the dial and pull that filter forwards. Vacuum the upper air flow openings with a long crevice nozzle.
  4. 4Wipe the smooth plastic parts with a damp cloth, rinse the filters under warm running water, shake them and dry them carefully. Wet filters can cause faults.
  5. 5Push the lower filter in and lock it with the yellow dial, push the upper filter in until it clicks, and close the door. To clear the reminder light, open and close the door with the dryer on.
Every number this part goes by
Retail name:
10762350

Sellers list any of these; they are the same part.

About your TWR780WP

Miele clothes dryer — T1 heat-pump dryer. Its lint filter is the T1 fluff filter (door opening) 10762350, part 10762350.

Also in this dryer: Miele T1 plinth filter (foam) 12551630.

Where the model number is: The model number is on the rating label inside the door or around the door opening; on some dryers it is on the back. It reads like WTW87565AU or EDH3284PDW.

Fits these 6 Miele models
Common questions
Which lint filter fits the Miele TWR780WP?
The Miele TWR780WP takes the Miele T1 fluff filter (door opening) 10762350.
Where can I buy the 10762350 in Australia?
We track 1 Australian seller for the 10762350; the lowest listed price when we last checked was A$106.91 at Miele Australia. Prices are re-checked daily and dated on this page.
How do I fit the 10762350 in a Miele TWR780WP?
No tools, a few minutes: 5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
Lint gets past a torn filter into the condenser or heat pump, airflow drops and each load takes longer to dry.
Is there anything to reset afterwards?
No reset needed. Some models show a reminder to clean the filter; it clears when the door is closed and a new programme starts.

Something looks wrong with the TWR780WP match? . Reports go to a person, not a bot.