EGO line trimmer spools and parts
Which spool, line or part each of the 8 EGO line trimmers sold in Australia takes, with dated prices from 2 Australian sellers.
Showing 8 of 8 EGO models · grouped by part
AS1302 spool assembly, 2.0 mm twisted line (5 m)takes AS1302
AL2420PD dual-colour pre-cut 2.4 mm twisted trimmer line (5 x 4 m)takes AL2420PD
How to change the spool in your EGO trimmer
Steps for the AS1302 spool assembly, 2.0 mm twisted line (5 m) (AS1302), the spool 4 EGO models take.
- 1Remove the battery pack.
- 2Press the two release tabs on the spool base and pull the spool retainer out.
- 3Take out the old spool and clean the retainer, spool area and spool base.
- 4Place the pre-wound spool into the retainer with its notches lined up with the retainer eyelets.
- 5Line up the retainer slots with the tabs on the spool base and press the retainer down evenly until it snaps into place.
Different steps for AL2420PD dual-colour pre-cut 2.4 mm twisted trimmer line (5 x 4 m)
After changing the spool
No reset needed.
Common questions
- What happens if I don't change the spool?
- The trimmer stops cutting when the line runs out, and line of the wrong diameter jams the head or strains the motor.
- Is there anything to reset after changing the spool on an EGO trimmer?
- No reset needed.
All 8 EGO line trimmers we list, A to Z
Brand names describe compatibility only; FitMatch is independent of EGO. Fitment sources are recorded on every model page.