FitMatch

The SodaStream Spirit takes the SodaStream screw-in gas cylinder (blue) (part 1032121610) as its gas cylinder; Australian sellers list it from A$35.00 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

SodaStream Spirit

Your sparkling water maker

Sparkling water maker

Confirmed against SodaStream's list

1032121610

Takes the 1032121610

Gas cylinder · check the code on your old part.

Other SodaStream sparkling water makers that take the 1032121610

Genuine

$35.00

Big W · 26 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by SodaStream. Compatible: another brand.

Lowest price · $35.00

Big W. Every seller we track is listed below. Some links earn us a commission.

Open Big W

Other parts this sparkling water maker takes

Compare 8 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $35.00

Opens Big W in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when the gas runs out. SodaStream says a 60 L cylinder makes up to 60 L of sparkling water, depending on the level of carbonation and the machine.

How to change the gas cylinder in your SodaStream Spirit

Watch the guide or follow the steps.

SodaStream - Inserting the Cylinder · Sodastream Australia (official)
  1. 1Take the bottle off the machine first. SodaStream says never fit or change a cylinder while a bottle is attached.
  2. 2Stand the machine on a flat, sturdy surface and remove the back cover (on most models, press the button at the back and lift the cover off).
  3. 3Unscrew the empty cylinder by hand and lift it out.
  4. 4Stand the full cylinder upright, remove the seal and twist off the cap.
  5. 5Tilt the machine forward, put the cylinder in the back base first, then raise it and screw it in by hand until it is held firmly. Never use tools.
  6. 6Refit the back cover. Keep the empty cylinder to exchange for a full one.
Every number this part goes by
Retail name:
1032111610
Retail name:
1032121610
Retail name:
blue cylinder
Retail name:
CO2 cylinder
Retail name:
screw-in cylinder
Retail name:
screw-in gas cylinder
Retail name:
SodaStream CO2
Retail name:
SodaStream cylinder
Retail name:
SodaStream gas cylinder

Sellers list any of these; they are the same part.

About your Spirit

SodaStream sparkling water maker — SodaStream screw-in (blue cylinder). Its gas cylinder is the screw-in gas cylinder (blue), part 1032121610.

Also in this sparkling water maker: SodaStream 1 L Fuse bottle, SodaStream ensō 1 L bottle, SodaStream 1 L Classic bottle, SodaStream Fizz & Go Easy Mix bottle, SodaStream 0.5 L Fuse bottle.

Where the model number is: The machine's name is printed on its front or base (SodaStream Terra, Art, E-Duo, Spirit; Aarke Carbonator 3). The gas cylinder's type is printed on its label.

Fits these 12 SodaStream models

Aqua Fizz. SodaStream names no carafe for the Aqua Fizz in Australia, so only its gas cylinder is listed.

Common questions
Which gas cylinder fits the SodaStream Spirit?
The SodaStream Spirit takes the SodaStream screw-in gas cylinder (blue) (part 1032121610).
Where can I buy the 1032121610 in Australia?
We track 8 Australian sellers for the 1032121610; the lowest listed price when we last checked was A$35.00 at Big W. Prices are re-checked daily and dated on this page.
How do I fit the 1032121610 in a SodaStream Spirit?
No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
When the cylinder runs empty the machine stops carbonating, and the maker says not to use a bottle past its date or one that is damaged.

Something looks wrong with the Spirit match? . Reports go to a person, not a bot.