What happens if I don't change the gas cylinder?

When the cylinder runs empty the machine stops carbonating, and the maker says not to use a bottle past its date or one that is damaged.

SodaStream gas cylinders and bottles

Which gas cylinder and bottles each of the 23 SodaStream sparkling water makers sold in Australia takes, with dated prices from 9 Australian sellers.

Most take the 1032121610 (12 of 23 models), from $35.00. Check yours below.

Showing 21 of 23 SodaStream models · grouped by part

Loading more models…

Steps for the screw-in gas cylinder (blue) (1032121610), the gas cylinder 12 SodaStream models take.

1Take the bottle off the machine first. SodaStream says never fit or change a cylinder while a bottle is attached.
2Stand the machine on a flat, sturdy surface and remove the back cover (on most models, press the button at the back and lift the cover off).
3Unscrew the empty cylinder by hand and lift it out.
4Stand the full cylinder upright, remove the seal and twist off the cap.
5Tilt the machine forward, put the cylinder in the back base first, then raise it and screw it in by hand until it is held firmly. Never use tools.
6Refit the back cover. Keep the empty cylinder to exchange for a full one.

What happens if I don't change the gas cylinder?: When the cylinder runs empty the machine stops carbonating, and the maker says not to use a bottle past its date or one that is damaged.

Brand names describe compatibility only; FitMatch is independent of SodaStream. Fitment sources are recorded on every model page.