The AEG LF9A1612A takes the AEG front loader drain pump filter 140064864014 as its pump filter; Australian sellers list it from A$14.99 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.
Your front loader
AEG LF9A1612A
Front loader washing machine
Confirmed against AEG's listConfirmed against AEG's own compatibility list
Not yours? Change
Takes the 140064864014 pump filter
front loader drain pump filter 140064864014 · check the code printed on your old filter before ordering.
Your front loader
Front loader washing machine
Confirmed against AEG's listConfirmed against AEG's own compatibility list
Takes the 140064864014
Pump filter · check the code on your old filter.
Other AEG front loaders that take the 140064864014
GenuineGenuine AEG
$14.99
AEG Australia · 28 OctLowest genuine · AEG Australia · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by AEG. Compatible: another brand.Genuine is made by AEG. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $14.99
AEG Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens AEG Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is cracked or damaged or no longer seals; AEG says to clean the drain pump filter twice a year, and when the machine does not drain or shows a drain alarm.
After replacing: No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.
How to change the pump filter in your AEG LF9A1612A
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Switch off and unplug the machine, and wait until the water inside has cooled. Never remove the filter while the machine is running.
- 2Open the pump cover at the bottom front, put a bowl under it and keep a towel nearby. Open the chute downwards.
- 3Turn the filter half a turn anticlockwise without taking it out and let the water run into the bowl. Turn it back to empty the bowl, and repeat until no more water comes out.
- 4Turn the filter anticlockwise to remove it. Take fluff and objects out of the recess and check the pump impeller can turn; if it cannot, call the service centre.
- 5Clean the filter under the tap, turn it clockwise back into its guides until it is tight so it does not leak, and close the pump cover.
Every number this part goes by
- Retail name:
- 140064864014
Sellers list any of these; they are the same part.
About your AEG LF9A1612A
AEG washing machine, front loader washing machine — Front load washing machine (AEG). Its pump filter is the front loader drain pump filter 140064864014, part 140064864014.
Where the model number is: On a top loader the rating plate with the model is inside the lid or on the back; on a front loader, around the door opening or on the back. Switch the machine off at the wall before you take a filter out.
Fits these 18 AEG models
Common questions
- Which pump filter fits the AEG LF9A1612A?
- The AEG LF9A1612A takes the AEG front loader drain pump filter 140064864014.
- Where can I buy the 140064864014 in Australia?
- We track 1 Australian seller for the 140064864014; the lowest listed price when we last checked was A$14.99 at AEG Australia. Prices are re-checked daily and dated on this page.
- How do I fit the 140064864014 in an AEG LF9A1612A?
- 5 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- A cracked or damaged pump filter can leak or let small objects through to the pump. A blocked one is cleaned, not changed: the machine stops draining until it is.
- Is there anything to reset afterwards?
- No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.
Something looks wrong with the LF9A1612A match? . Reports go to a person, not a bot.