FitMatch

The AEG LWA8516O5A takes the AEG front loader drain pump filter 140064864014 as its pump filter; Australian sellers list it from A$14.99 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

AEG LWA8516O5A

Your front loader

Front loader washing machine

Confirmed against AEG's list

140064864014

Takes the 140064864014

Pump filter · check the code on your old filter.

Other AEG front loaders that take the 140064864014

Genuine

$14.99

AEG Australia · 28 Oct

Compatible

See seller

No compatible seller tracked yet

Genuine: made by AEG. Compatible: another brand.

Lowest price · $14.99

AEG Australia. Every seller we track is listed below. Some links earn us a commission.

Open AEG Australia

Compare 1 seller

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $14.99

Opens AEG Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How long it lasts

Replace it when it is cracked or damaged or no longer seals; AEG says to clean the drain pump filter twice a year, and when the machine does not drain or shows a drain alarm.

After replacing: No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.

How to change the pump filter in your AEG LWA8516O5A

Watch the guide or follow the steps.

No clear video for this part yet. The steps cover it.

  1. 1Switch off and unplug the machine, and wait until the water inside has cooled. Never remove the filter while the machine is running.
  2. 2Open the pump cover at the bottom front, put a bowl under it and keep a towel nearby. Open the chute downwards.
  3. 3Turn the filter half a turn anticlockwise without taking it out and let the water run into the bowl. Turn it back to empty the bowl, and repeat until no more water comes out.
  4. 4Turn the filter anticlockwise to remove it. Take fluff and objects out of the recess and check the pump impeller can turn; if it cannot, call the service centre.
  5. 5Clean the filter under the tap, turn it clockwise back into its guides until it is tight so it does not leak, and close the pump cover.
Every number this part goes by
Retail name:
140064864014

Sellers list any of these; they are the same part.

About your LWA8516O5A

AEG washing machine, front loader washing machine — Front load washing machine (AEG). Its pump filter is the front loader drain pump filter 140064864014, part 140064864014.

Where the model number is: On a top loader the rating plate with the model is inside the lid or on the back; on a front loader, around the door opening or on the back. Switch the machine off at the wall before you take a filter out.

Fits these 18 AEG models
Common questions
Which pump filter fits the AEG LWA8516O5A?
The AEG LWA8516O5A takes the AEG front loader drain pump filter 140064864014.
Where can I buy the 140064864014 in Australia?
We track 1 Australian seller for the 140064864014; the lowest listed price when we last checked was A$14.99 at AEG Australia. Prices are re-checked daily and dated on this page.
How do I fit the 140064864014 in an AEG LWA8516O5A?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A cracked or damaged pump filter can leak or let small objects through to the pump. A blocked one is cleaned, not changed: the machine stops draining until it is.
Is there anything to reset afterwards?
No reset needed. If the machine showed a drain alarm, clear the blockage, refit the filter and start a new programme.

Something looks wrong with the LWA8516O5A match? . Reports go to a person, not a bot.