NutriBullet blender blades and parts by part number

NutriBullet's Easy Twist Blade (BDM-BA002CDB) fits the cups of the newer NutriBullet range: Pro 1000 and 1200, Select 1000 and 1200, and Blender Combo 1000 and 1200. The seal is built in and isn't meant to come out. NutriBullet suggests a new blade about every 6 months, depending on use.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: NutriBullet blenders have no blade reminder.

Fits 6 NutriBullet models: Blender Combo 1000, Blender Combo 1200, Pro 1000, Pro 1200, Select 1000, Select 1200.

NutriBullet's own Cross Blade (NBM-BA031) is the extractor blade for the original screw-on cups. NutriBullet Australia lists it for the 500, 600 and 900 Series, the 900 Mega and the 1000 Mega. The gasket is built into the blade and can't be bought on its own, so a worn or leaking gasket means a new blade. NutriBullet suggests a new blade about every 6 months.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: NutriBullet personal blenders have no blade reminder.

Fits 4 NutriBullet models: 1000 Mega, 500 Series, 600 Series, 900 Series.

NutriBullet's 1000/1200W Blade (NBM-BA041) suits the NutriBullet 1200 Series, the Pro+ 1200 and the Balance; NutriBullet Australia also names a 1000 Series. It does not fit the Ultra 1000 or Ultra 1200. The gasket is part of the blade, and NutriBullet suggests replacing the blade about every 6 months.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: NutriBullet personal blenders have no blade reminder.

Fits 4 NutriBullet models: 1000 Mega, 1200 Series, Balance, Pro+ 1200.

The Rapid Extractor Blade (BDM-BA026CDB) is the blade for the NutriBullet Ultra 1000 and Ultra 1200, and NutriBullet also lists it for the Ultra Plus+. Its Ultra guides suggest replacing it at least every 5 years or at the first signs of wear, and not using it if the blades don't spin freely or the gasket is missing or damaged. It is top-rack dishwasher safe.

Change it every 5 years; 5 steps, no tools.

After the change: No reset: the NutriBullet Ultra has no blade reminder.

Fits 3 NutriBullet models: Ultra 1000, Ultra 1200, Ultra Plus+ Compact Kitchen System.

NutriBullet's Smart Touch Extractor Blade (ANBEZ-BA005CDB) fits the single-serve cups of the Smart Touch Blender Combo 1500W and the Triple Prep System. Its seal is part of the blade. NutriBullet suggests replacing the blade about every 6 months, depending on use.

Change it every 6 months; 4 steps, no tools.

After the change: No reset: these blenders have no blade reminder.

Fits 2 NutriBullet models: Smart Touch Blender Combo, Triple Prep System.

The Deluxe Easy Twist Extractor Blade (ANBFB-BA033CDB) fits the cups of the NutriBullet SmartSense Blender Combo, and NutriBullet says only the SmartSense. The gasket isn't removable: if it comes out, the blade needs replacing. The SmartSense guide recommends a new blade every 6 months, or as needed.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: the SmartSense has no blade reminder.

Fits the SmartSense Blender Combo.

NutriBullet's Turbo Rapid Extractor Blade (BDM-BA034CDB) is made for the NutriBullet Turbo 1000. The Turbo guide recommends replacing it every 12 to 18 months, or sooner if the blades stop turning freely or the gasket is missing or damaged.

Change it every 12 months; 4 steps, no tools.

After the change: No reset: the NutriBullet Turbo has no blade reminder.

Fits the Turbo 1000.

The Flex Blade (BDM-BA035CDB) is the black blade block for the NutriBullet Flex portable blender, in any colour. It twists into the bottom of the blending cup until it reaches a built-in soft stop. NutriBullet's general advice is to replace blades about every 6 months, depending on use.

Change it every 6 months; 4 steps, no tools.

After the change: No reset: the Flex has no blade reminder. Its light ring flashes orange if the blade block is not fully locked.

Fits the Flex.

NutriBullet's RX Blade (NBM-BA020) comes with a brush for cleaning stuck-on food from the blade, and NutriBullet says it fits the NutriBullet RX 1700W only. NutriBullet's general advice is to replace extractor blades about every 6 months, depending on use, and to keep the gasket in place.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: the NutriBullet RX has no blade reminder.

Fits the RX.

The NutriBullet Baby Cross Blade (NBY-BA029CDB) is the replacement blade for the NutriBullet Baby. NutriBullet says it can't go in a steriliser or dishwasher: wash it in cold soapy water. The Baby guide recommends a new blade every 6 months, and a new one if the seal comes out.

Change it every 6 months; 5 steps, no tools.

After the change: No reset: the NutriBullet Baby has no blade reminder.

Fits the Baby.