The Baratza Encore takes the Baratza Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) (part SP0100801) as its burr; Australian sellers list it from A$24.07 as of 1 November 2026. Fitment confirmed against the manufacturer's compatibility list.
Your grinder
Baratza Encore
Coffee grinder
Confirmed against Baratza's listConfirmed against Baratza's own compatibility list
Not yours? Change
Takes the SP0100801 burr
Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) · check the code on your old part before ordering.
The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
Your grinder
Coffee grinder
Confirmed against Baratza's listConfirmed against Baratza's own compatibility list
Takes the SP0100801
Burr · check the code on your old part.
The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
Other Baratza grinders that take the SP0100801
GenuineGenuine Baratza
$24.07
Baratza Australia · 1 NovLowest genuine · Baratza Australia · checked 1 Nov
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Baratza. Compatible: another brand.Genuine is made by Baratza. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $24.07
Baratza Australia. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Baratza Australia in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when it is worn or damaged; Baratza gives no set interval.
After replacing: No reset: the grinder has no reminder for the burrs.
How to change the burr in your Baratza Encore
Watch the guide or follow the steps.
- 1Grind out any beans left in the hopper, then unplug the grinder.
- 2Turn the hopper anticlockwise until its indicator lines up with the triangle near setting 40, and lift it off.
- 3Use the grind adjustment tabs to turn the adjustment ring fully anticlockwise, then lift the ring burr straight out by its two lifting tabs. Keep the hopper gasket.
- 4Fit the new ring burr with its red lifting tab lined up with the red mark on the adjustment ring (near setting 30) and press it fully down.
- 5Put the hopper gasket on top, thick side down inside the plastic rim of the ring burr.
- 6Line the hopper up with the triangle near 40, push it down and turn it clockwise until it clicks.
Every number this part goes by
- Retail name:
- 6374
- Retail name:
- Baratza 6374
- Retail name:
- Baratza Encore ring burr
- Retail name:
- Baratza Virtuoso+ ring burr
- Retail name:
- SP0100801
Sellers list any of these; they are the same part.
About your Baratza Encore
Baratza coffee grinder — Encore. Its burr is the Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+), part SP0100801.
Other burrs the maker lists for this grinder: Baratza M3 Conical Burr (Encore). The cone (lower) burr. The Encore comes with this M3 burr; changing it means taking the case and gearbox apart, about 20 minutes.
Where the model number is: The model number is usually on a sticker on the underside or back of the machine.
Fits these 2 Baratza models
Common questions
- Which burr fits the Baratza Encore?
- The Baratza Encore takes the Baratza Ring Burr and Holder for Conical Burr Grinders (Encore, Virtuoso+) (part SP0100801). The ring (upper) burr in its holder: it lifts out by hand from under the hopper.
- Where can I buy the SP0100801 in Australia?
- We track 1 Australian seller for the SP0100801; the lowest listed price when we last checked was A$24.07 at Baratza Australia. Prices are re-checked daily and dated on this page.
- How do I fit the SP0100801 in a Baratza Encore?
- No tools, a few minutes: 6 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Worn burrs crush the beans instead of cutting them: the grind turns uneven, with more fine dust and larger pieces, so shots run fast or choke and taste flat or bitter, and grinding takes longer.
- Is there anything to reset afterwards?
- No reset: the grinder has no reminder for the burrs.
Something looks wrong with the Encore match? . Reports go to a person, not a bot.