FitMatch

The Toro 21462 takes the Toro 22 in. (56 cm) Recycler blade 131-4547-03 as its blade; replace it every 12 months; Australian sellers list it from A$32.08 as of 31 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Toro 21462

Your lawn mower

Lawn mower

Confirmed against Toro's list

131-4547-03

Takes the 131-4547-03

Blade · every 12 months · check the code on your old part.

Takes one 22 in. bar blade, 131-4547-03, Toro says. Toro also sells the 22 inch Atomic blade 59534P as an accessory.

Other Toro lawn mowers that take the 131-4547-03

Genuine

See seller

Amazon AU · 28 Oct

Compatible

$32.08

Power Mowers · 31 Oct

Check seller

Genuine: made by Toro. Compatible: another brand.

Lowest compatible · $32.08

Power Mowers. Compare with genuine below. Some links earn us a commission.

Open Power Mowers

Other parts this lawn mower takes

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $32.08

Opens Power Mowers in a new tab. Their page is the source of truth for price, delivery and returns.

Not due yet?

Get a nudge when your blade is due — it's every 12 months. One email two weeks before, no newsletter. Manage or stop it anytime.

Also saves the model to a FitMatch account under this address; the email signs you in, no password.

How to change the blade in your Toro 21462

Watch the guide or follow the steps.

How to Replace a Toro Walk Behind Lawn Mower Blade - Using Toro Parts Blade 131-4547-03 · WEINGARTZ
  1. 1Shut off the engine, wait for all moving parts to stop and disconnect the spark-plug wire. Wear gloves: the blade is sharp.
  2. 2Let the fuel tank run dry first (or remove the fuel with a hand pump), then tip the mower onto its side with the air filter up and the dipstick down.
  3. 3Hold the blade steady with a block of wood and remove the blade, keeping all the mounting hardware.
  4. 4Fit the new blade and all the hardware, with the curved ends of the blade pointing toward the mower housing.
  5. 5Tighten the blade bolt to 82 N·m (60 ft-lb) with a torque wrench, then reconnect the spark-plug wire. Toro says to see a service dealer if you don't have a torque wrench.
Every number this part goes by
Retail name:
131-4547-03
Retail name:
1314547-03
Retail name:
131454703

Sellers list any of these; they are the same part.

About your 21462

Toro lawn mower — Recycler 22 in. (56 cm). Its blade is the 22 in. (56 cm) Recycler blade 131-4547-03, part 131-4547-03, changed every 12 months.

Also in this lawn mower:

Where the model number is: The model is on the label on the mower's deck or handle. Disconnect the spark plug lead, or take the battery or safety key out, before you tip the mower: the blade is sharp.

Fits these 2 Toro models

Toro2 models

Takes one 22 in. bar blade, 131-4547-03, Toro says. Toro also sells the 22 inch Atomic blade 59534P as an accessory.

Common questions
Which blade fits the Toro 21462?
The Toro 21462 takes the Toro 22 in. (56 cm) Recycler blade 131-4547-03. Takes one 22 in. bar blade, 131-4547-03, Toro says. Toro also sells the 22 inch Atomic blade 59534P as an accessory.
How often should I replace the blade in my Toro 21462?
Every 12 months, or sooner if it looks worn.
Where can I buy the 131-4547-03 in Australia?
We track 2 Australian sellers for the 131-4547-03; the lowest listed price when we last checked was A$32.08 at Power Mowers. Prices are re-checked daily and dated on this page.
How do I fit the 131-4547-03 in a Toro 21462?
5 steps, listed on this page with the replacement video where the maker has one.
What happens if I don't change it?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Is there anything to reset afterwards?
No reset needed.

Something looks wrong with the 21462 match? . Reports go to a person, not a bot.