Kärcher steam cleaner pads and cartridges by part number

Kärcher's two-pack of Universal floor cloths for the EasyFix floor nozzle, the cloth that comes in the box with its SC 2 to SC 5 EasyFix, Deluxe and Upright steam cleaners. The cloths attach by hook-and-loop and come off without touching the dirt: you step on the tab and lift the nozzle. Wash them at up to 60 °C without fabric softener.

After the change: No reset: the maker describes no replacement reminder for this part.

Fits 10 Kärcher models: SC 2 Deluxe, SC 2 EasyFix, SC 2 Upright, SC 3 Deluxe, SC 3 EasyFix, SC 3 EasyFix Go!Further, SC 3 Upright, SC 4 EasyFix Iron Plug, SC 5 Deluxe Signature Line, SC EasyFix ATK 2.

Two microfibre cloths for Kärcher's flexible hand nozzle, which comes with the SC 3 EasyFix Go!Further and is an add-on for its other steam cleaners. The cloths attach by hook-and-loop, so you can change them without touching the dirt. The standard hand nozzle takes the hand nozzle cover set 2.863-344.0 instead.

After the change: No reset: the maker describes no replacement reminder for this part.

Fits 10 Kärcher models: SC 1 Multi, SC 1 Multi & Up, SC 2 Deluxe, SC 2 EasyFix, SC 3 Deluxe, SC 3 EasyFix, SC 3 EasyFix Go!Further, SC 4 EasyFix Iron Plug, SC 5 Deluxe Signature Line, SC EasyFix ATK 2.

Kärcher's Power set of two EasyFix floor cloths with abrasive fibres, for hard floors with medium to stubborn dirt. One cloth is Ultra Abrasive, the other Abrasive with soft sections for wiping up. It fits the same EasyFix floor nozzle as the Universal cloths on the SC 2 to SC 5 EasyFix, Deluxe and Upright models.

After the change: No reset: the maker describes no replacement reminder for this part.

Fits 10 Kärcher models: SC 2 Deluxe, SC 2 EasyFix, SC 2 Upright, SC 3 Deluxe, SC 3 EasyFix, SC 3 EasyFix Go!Further, SC 3 Upright, SC 4 EasyFix Iron Plug, SC 5 Deluxe Signature Line, SC EasyFix ATK 2.

Two microfibre covers for the hand nozzle on Kärcher steam cleaners, for kitchens, bathrooms and hobs. Each cover has an elastic cord that holds it on the nozzle. Kärcher lists it for the SC 1 Multi, SC 1 Multi & Up and the SC 2 to SC 5 cylinder models; the Upright steam mops have no hand nozzle.

After the change: No reset: the maker describes no replacement reminder for this part.

Fits 9 Kärcher models: SC 1 Multi, SC 1 Multi & Up, SC 2 Deluxe, SC 2 EasyFix, SC 3 Deluxe, SC 3 EasyFix, SC 4 EasyFix Iron Plug, SC 5 Deluxe Signature Line, SC EasyFix ATK 2.

Kärcher's descaling cartridge for the SC 2 Upright, SC 3 Upright, SC 3 EasyFix, SC 3 EasyFix Go!Further and SC 3 Deluxe. It takes the lime out of the tank water so the machine needs no other descaling. A light warns when the run time is nearly up; after that the steamer stops making steam until you fit a new cartridge and reset the timer.

After the change: SC 3 EasyFix, SC 3 EasyFix Go!Further and SC 3 Upright: switch on and hold the RESET button for 4 seconds until the "replace decalcification cartridge" light goes out. SC 3 Deluxe: hold the maximum and reduced steam buttons together until that light goes out. SC 2 Upright: hold the steam lever, plug in and keep holding for 7 seconds; the light flashes green twice.

Fits 5 Kärcher models: SC 2 Upright, SC 3 Deluxe, SC 3 EasyFix, SC 3 EasyFix Go!Further, SC 3 Upright.

Kärcher's small descaling cartridge for the SC 1 Upright steam mop and the SC 1 Multi and SC 1 Multi & Up. It goes in the water tank and stops lime building up inside the steamer. Kärcher says to change it after 4 months or about 15 litres of water. The used cartridge goes in household waste.

Change it every 4 months; 5 steps, no tools.

After the change: SC 1 Multi and SC 1 Multi & Up: hold the steam switch while you plug in and keep holding it for 7 seconds; it flashes green and the cartridge run time restarts. The SC 1 Upright has no reset: write the date on the cartridge label and change it after 4 months or about 15 litres.

Fits 3 Kärcher models: SC 1 Multi, SC 1 Multi & Up, SC 1 Upright.

Two Universal large floor cloths for the EasyFix Large floor nozzle on Kärcher's SC 1 Upright steam mop and the SC 1 Multi & Up. Kärcher lists them only for these SC 1 models; the SC 2 to SC 5 floor nozzle takes the Universal set 2.863-339.0. The cloths attach by hook-and-loop and wash at up to 60 °C.

After the change: No reset: the maker describes no replacement reminder for this part.

Fits 3 Kärcher models: SC 1 Multi, SC 1 Multi & Up, SC 1 Upright.