The Milwaukee M18ONEF2POVC34M0 takes the Milwaukee HEPA filters 49901968 for M18ONEF2POVC34M0 (set of 2) as its filter; Australian sellers list it from A$82.00 as of 28 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Your vacuum cleaner
Milwaukee M18ONEF2POVC34M0
Wet and dry vacuum
Confirmed against Milwaukee's listConfirmed against Milwaukee's own compatibility list
Not yours? Change
Takes the 49901968 filter
HEPA filters 49901968 for M18ONEF2POVC34M0 (set of 2) · check the code printed on your old filter before ordering.
Takes two HEPA filters; 49901968 is a pack of 2.

Your vacuum cleaner
Wet and dry vacuum
Confirmed against Milwaukee's listConfirmed against Milwaukee's own compatibility list

Takes the 49901968
Filter · check the code on your old filter.
Takes two HEPA filters; 49901968 is a pack of 2.
Other Milwaukee vacuum cleaners and their filters and dust bags
The 49901968 fits the M18ONEF2POVC34M0 only. These Milwaukee models take a different filter:
GenuineGenuine Milwaukee
$82.00
Sydney Tools · 28 OctLowest genuine · Sydney Tools · checked 28 Oct
CompatibleCompatible option
See seller
No compatible seller tracked yetNo compatible seller tracked yet
Genuine: made by Milwaukee. Compatible: another brand.Genuine is made by Milwaukee. Compatible is made by another brand. Check the seller's page for the size and models it fits.
Lowest price · $82.00
Sydney Tools. Every seller we track is listed below. Some links earn us a commission. Some seller links earn us a commission, at no extra cost to you.
This vacuum cleaner also takes a dust bag
- Milwaukee fleece dust bags 49901969 for M18ONEF2POVC34M0 (5 pack)Open Sydney Tools$14.80 each · 5-pack $74.00
Separate from the filter. Reduces fine dust reaching the HEPA filters.
Compare 1 seller
AUD, before delivery. Each price shows when it was checked.
Opens Sydney Tools in a new tab. Their page is the source of truth for price, delivery and returns.
How long it lasts
Replace it when the filters are damaged or airflow drops, Milwaukee says; it suggests cleaning or replacing them after about 200 holes (16 mm wide, 100 mm deep) or the same amount of dust.
After replacing: No reset. Use the automatic filter cleaning to keep airflow up between changes.
How to change the filter in your Milwaukee M18ONEF2POVC34M0
Watch the guide or follow the steps.
No clear video for this part yet. The steps cover it.
- 1Turn off the dust extractor, unplug it and take out the batteries.
- 2Unlatch and open the filter compartment.
- 3Pull the filters away from the extractor. Put old filters straight into a container with a tight-fitting lid.
- 4Fit the new filters by reversing the removal steps, then close and latch the filter compartment.
Every number this part goes by
- Retail name:
- 49901968
Sellers list any of these; they are the same part.
About your Milwaukee M18ONEF2POVC34M0

Milwaukee vacuum cleaner, wet and dry vacuum — M18 FUEL PACKOUT dual battery 34 L M-Class dust extractor. Its filter is the HEPA filters 49901968 for M18ONEF2POVC34M0 (set of 2), part 49901968.
Also in this vacuum cleaner: Milwaukee fleece dust bags 49901969 for M18ONEF2POVC34M0 (5 pack).
Where the model number is: The rating label is on the underside or the back of the main body; the old part usually has its own code printed on it.
Fits this Milwaukee model
Milwaukee1 model
Takes two HEPA filters; 49901968 is a pack of 2.
Common questions
- Which filter fits the Milwaukee M18ONEF2POVC34M0?
- The Milwaukee M18ONEF2POVC34M0 takes the Milwaukee HEPA filters 49901968 for M18ONEF2POVC34M0 (set of 2). Takes two HEPA filters; 49901968 is a pack of 2.
- Where can I buy the 49901968 in Australia?
- We track 1 Australian seller for the 49901968; the lowest listed price when we last checked was A$82.00 at Sydney Tools. Prices are re-checked daily and dated on this page.
- How do I fit the 49901968 in a Milwaukee M18ONEF2POVC34M0?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
- What happens if I don't change it?
- Suction drops and the vacuum may cut out on a blocked filter.
- Is there anything to reset afterwards?
- No reset. Use the automatic filter cleaning to keep airflow up between changes.
Something looks wrong with the M18ONEF2POVC34M0 match? . Reports go to a person, not a bot.