FitMatch

Honda lawn mower blades

Which blade (and on petrol mowers, which air filter and spark plug) each of the 19 Honda lawn mowers sold in Australia takes, with dated prices from 4 Australian sellers, genuine and compatible side by side.

Showing 19 of 19 Honda models

Blade kit 2x 19" M1 06725-VK0-W80takes 06725-VK0-W80

Blade kit 19" x4 06720-VK0-600takes 06720-VK0-600

Blade kit 4x 21" 06725-VJ9-W80takes 06725-VJ9-W80

Air cleaner element 17211-ZG9-800 (GXV140)takes 17211-ZG9-800

2 blade kit hi-lift 19" 06720-VA3-K80takes 06720-VA3-K80

2 blade kit hi-lift 21" 06725-VJ9-B80takes 06725-VJ9-B80

Lower rotary blade 72511-VH7-000 (HRX217)takes 72511-VH7-000

How to change the blade in your Honda mower

Steps for the 2 blade kit hi-lift 19" 06720-VA3-K80 (06720-VA3-K80), the blade 9 Honda models take.

No clear video for this blade yet. The steps cover it.

  1. 1Stop the engine, turn the fuel valve off and disconnect the spark plug cap from the spark plug. Wear thick leather gloves.
  2. 2Tilt the mower onto its right side so the fuel cap side is up; Honda says this helps prevent fuel leaks and carburettor flooding.
  3. 3Hold the blades so they cannot turn and remove the blade bolts, then take off the old swing-back blades.
  4. 4Clean grass and dirt from around the blade disc and check the disc for damage; replace it if a blade has hit something hard.
  5. 5Fit the new blades as a set with the blade-setting bolts, washers and lock nuts shown in Honda's parts diagram (Honda says to use only Honda genuine bolts and washers), and tighten them firmly. If you do not have a torque wrench, Honda says to have a Honda dealer tighten the blade bolts.

Different steps for air cleaner element 17211-ZL8-023 (GCV160, GSV190) · Different steps for NGK BPR6ES spark plug · Different steps for air cleaner element 17210-Z1V-003 (GXV160) · Different steps for outer foam filter 17218-ZE6-305 (GXV160) · Different steps for NGK BPR5ES spark plug · Different steps for outer foam filter (wet) 17218-Z2A-000 (GSV190 Bull) · Different steps for Denso W16EPR-U spark plug · Different steps for air cleaner element 17211-Z8B-901 · Different steps for air cleaner element 17211-ZG9-800 (GXV140) · Different steps for outer foam filter 17218-ZG9-800 (GXV140) · Different steps for lower rotary blade 72511-VH7-000 (HRX217) · Different steps for upper rotary blade 72531-VH7-000 (HRX217)

After changing the blade

No reset needed.

Common questions

What happens if I don't change the blade?
A blunt blade tears the grass tips, which then brown, and a bent blade makes the mower vibrate and wears the engine or motor.
Does Honda make a compatible blade?
Honda makes the genuine blade. Compatible blades for Honda models are made by other companies to fit the same models, and Australian sellers we track list both; each part page shows the genuine and compatible prices side by side.
Is there anything to reset after changing the blade on a Honda mower?
No reset needed.
All 19 Honda lawn mowers we list, A to Z

Brand names describe compatibility only; FitMatch is independent of Honda. Fitment sources are recorded on every model page.