FitMatch

The Nespresso CitiZ & Milk takes the Nespresso Descaling Kit, 2 x 125 ml (part 5000-2) as its descaler; Australian sellers list it from A$19.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Nespresso CitiZ & Milk

Your coffee machine

Confirmed against Nespresso's list

Not yours? Change
5000-2

Takes the 5000-2

Descaler · check the code on your old part.

Other Nespresso coffee machines that take the 5000-2

Genuine

$19.99

Nespresso Australia · 26 Oct

We list the maker's own descaler only.

Lowest price · $19.99

Nespresso Australia. Every seller we track is listed below. Some links earn us a commission.

Open Nespresso Australia

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Nespresso AustraliaGenuine · checked 26 Oct$19.99Open
Amazon AUGenuine · checked 26 Oct$35.92Open
Amazon AUGenuine · checked 26 Oct$47.00Open
Open cheapest seller · $19.99

Opens Nespresso Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How often to descale

Descale every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.

After descaling: The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

How to descale your Nespresso CitiZ & Milk

Watch the guide or follow the steps.

CitiZ - Descaling · Nespresso (official)
  1. 1Remove the capsule and close the lever, then empty the drip tray and used capsule container.
  2. 2Pour one bottle of descaler and 500 ml of water into the water tank. Put a container that holds at least 1 litre under the coffee outlet.
  3. 3With the machine on, hold Espresso and Lungo together for 3 seconds until both lights blink. Press Lungo and wait until the tank is empty.
  4. 4Pour the collected solution back into the tank, put the container back under the outlet and press Lungo again.
  5. 5Empty and rinse the tank, fill it with fresh water and press Lungo to rinse. Rinse twice, refilling the tank with fresh water each time.
  6. 6Hold Espresso and Lungo together for 3 seconds to leave descaling mode. The machine is then ready to use.
Every number this part goes by
Retail name:
138034
Retail name:
5000-2
Retail name:
Durgol Nespresso Descaling Kit
Retail name:
Nespresso Descaling Kit
Replaces:
3035/CBU-2

Sellers list any of these; they are the same part.

About your CitiZ & Milk

Nespresso coffee machine — Original. Its descaler is the Descaling Kit, 2 x 125 ml, part 5000-2.

Where the model number is: The model number is usually on a sticker on the underside or back of the machine.

For these 31 Nespresso models
Common questions
Which descaler should I use in the Nespresso CitiZ & Milk?
The Nespresso Descaling Kit, 2 x 125 ml (part 5000-2).
How often should I descale my Nespresso CitiZ & Milk?
Every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.
Where can I buy the 5000-2 in Australia?
We track 2 Australian sellers for the 5000-2; the lowest listed price when we last checked was A$19.99 at Nespresso Australia. Prices are re-checked daily and dated on this page.
How do I descale a Nespresso CitiZ & Milk?
6 steps, listed on this page with the maker's video where there is one.
How do I reset the reminder?
The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

Something looks wrong with the CitiZ & Milk match? . Reports go to a person, not a bot.