FitMatch

The Nespresso Vertuo takes the Nespresso Descaling Kit, 2 x 125 ml (part 5000-2) as its descaler; Australian sellers list it from A$19.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Nespresso Vertuo

Your coffee machine

Confirmed against Nespresso's list

5000-2

Takes the 5000-2

Descaler · check the code on your old part.

Other Nespresso coffee machines that take the 5000-2

Genuine

$19.99

Nespresso Australia · 26 Oct

We list the maker's own descaler only.

Lowest price · $19.99

Nespresso Australia. Every seller we track is listed below. Some links earn us a commission.

Open Nespresso Australia

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $19.99

Opens Nespresso Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How often to descale

Descale every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.

After descaling: The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

How to descale your Nespresso Vertuo

Watch the guide or follow the steps.

Nespresso VertuoLine Evoluo: How To - Descaling · Nespresso (official)
  1. 1Turn the machine on, open the head to eject the capsule, then close it and leave the lever unlocked. Empty the cup support and used capsule container.
  2. 2Pour one bottle of descaler and 500 ml of water into the water tank. Hold the button for at least 7 seconds until it blinks quickly.
  3. 3Within 45 seconds, turn the lever left to lock and right to unlock, then hold the button for at least 7 seconds again. Put a container that holds at least 800 ml under the coffee outlet.
  4. 4Lock the lever and press the button to start; the machine stops by itself when done. If it stops and blinks because it is badly scaled, wait several minutes and press the button again.
  5. 5Empty, rinse and clean the tank and cup support, fill the tank with fresh water and press the button to rinse. The machine stops by itself when the rinse is done.
  6. 6Hold the button for at least 7 seconds to leave descaling mode; the light stops blinking and stays steady. Let the machine dry for 10 minutes before you use it; the whole job takes about 20 minutes.
Every number this part goes by
Retail name:
138034
Retail name:
5000-2
Retail name:
Durgol Nespresso Descaling Kit
Retail name:
Nespresso Descaling Kit
Replaces:
3035/CBU-2

Sellers list any of these; they are the same part.

About your Vertuo

Nespresso coffee machine — Vertuo. Its descaler is the Descaling Kit, 2 x 125 ml, part 5000-2.

Where the model number is: The model number is usually on a sticker on the underside or back of the machine.

For these 31 Nespresso models
Common questions
Which descaler should I use in the Nespresso Vertuo?
The Nespresso Descaling Kit, 2 x 125 ml (part 5000-2).
How often should I descale my Nespresso Vertuo?
Every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.
Where can I buy the 5000-2 in Australia?
We track 2 Australian sellers for the 5000-2; the lowest listed price when we last checked was A$19.99 at Nespresso Australia. Prices are re-checked daily and dated on this page.
How do I descale a Nespresso Vertuo?
6 steps, listed on this page with the maker's video where there is one.
How do I reset the reminder?
The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

Something looks wrong with the Vertuo match? . Reports go to a person, not a bot.