FitMatch

The Nespresso Lattissima Plus takes the Nespresso Descaling Kit, 2 x 125 ml (part 5000-2) as its descaler; Australian sellers list it from A$19.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Nespresso Lattissima Plus

Your coffee machine

Confirmed against Nespresso's list

5000-2

Takes the 5000-2

Descaler · check the code on your old part.

Other Nespresso coffee machines that take the 5000-2

Genuine

$19.99

Nespresso Australia · 26 Oct

We list the maker's own descaler only.

Lowest price · $19.99

Nespresso Australia. Every seller we track is listed below. Some links earn us a commission.

Open Nespresso Australia

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Open cheapest seller · $19.99

Opens Nespresso Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How often to descale

Descale every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.

After descaling: The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

How to descale your Nespresso Lattissima Plus

Watch the guide or follow the steps.

Nespresso Lattissima+: How To - Descaling · Nespresso (official)
  1. 1Descale when the Cappuccino button shows orange. Empty the drip tray and used capsule container.
  2. 2Pour one bottle of descaler and 500 ml of water into the water tank. Open the pipe storage door and plug the descaling pipe into the steam connector; Cappuccino blinks orange to show descaling mode.
  3. 3Put a container that holds at least 1 litre under both the coffee outlet and the pipe nozzle, then press Cappuccino. The solution runs through the coffee outlet, pipe and drip tray until the tank is empty.
  4. 4Empty the used capsule container and drip tray, rinse the tank and fill it with fresh water to MAX. Put the container back and press Cappuccino again to rinse.
  5. 5When the machine switches off, remove and store the pipe, empty the drip tray and capsule container, and refill the tank with fresh water. Wipe the machine with a damp cloth.
Every number this part goes by
Retail name:
138034
Retail name:
5000-2
Retail name:
Durgol Nespresso Descaling Kit
Retail name:
Nespresso Descaling Kit
Replaces:
3035/CBU-2

Sellers list any of these; they are the same part.

About your Lattissima Plus

Nespresso coffee machine — Original. Its descaler is the Descaling Kit, 2 x 125 ml, part 5000-2.

Where the model number is: The model number is usually on a sticker on the underside or back of the machine.

For these 31 Nespresso models
Common questions
Which descaler should I use in the Nespresso Lattissima Plus?
The Nespresso Descaling Kit, 2 x 125 ml (part 5000-2).
How often should I descale my Nespresso Lattissima Plus?
Every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.
Where can I buy the 5000-2 in Australia?
We track 2 Australian sellers for the 5000-2; the lowest listed price when we last checked was A$19.99 at Nespresso Australia. Prices are re-checked daily and dated on this page.
How do I descale a Nespresso Lattissima Plus?
5 steps, listed on this page with the maker's video where there is one.
How do I reset the reminder?
The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

Something looks wrong with the Lattissima Plus match? . Reports go to a person, not a bot.