FitMatch

The Nespresso Lattissima Pro takes the Nespresso Descaling Kit, 2 x 125 ml (part 5000-2) as its descaler; Australian sellers list it from A$19.99 as of 26 October 2026. Fitment confirmed against the manufacturer's compatibility list.

Nespresso Lattissima Pro

Your coffee machine

Confirmed against Nespresso's list

Not yours? Change
5000-2

Takes the 5000-2

Descaler · check the code on your old part.

Other Nespresso coffee machines that take the 5000-2

Genuine

$19.99

Nespresso Australia · 26 Oct

We list the maker's own descaler only.

Lowest price · $19.99

Nespresso Australia. Every seller we track is listed below. Some links earn us a commission.

Open Nespresso Australia

Compare 3 listings from 2 sellers

AUD, before delivery. Each price shows when it was checked.

Nespresso AustraliaGenuine · checked 26 Oct$19.99Open
Amazon AUGenuine · checked 26 Oct$35.92Open
Amazon AUGenuine · checked 26 Oct$47.00Open
Open cheapest seller · $19.99

Opens Nespresso Australia in a new tab. Their page is the source of truth for price, delivery and returns.

How often to descale

Descale every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.

After descaling: The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

How to descale your Nespresso Lattissima Pro

Watch the guide or follow the steps.

Lattissima Pro - Descaling · Nespresso (official)
  1. 1Lift and close the lever to eject any capsule. Open the menu, select DESCALING and follow the prompts on the display.
  2. 2Empty the drip tray and used capsule container, then pour one bottle of descaler and 500 ml of water into the water tank.
  3. 3Fit the hot water spout and put a container that holds at least 1 litre under both the coffee outlet and the spout. Confirm to start; the solution runs through the coffee outlet, hot water spout and drip tray.
  4. 4For the rinse, empty and rinse the drip tray and used capsule container, then rinse the tank and fill it with fresh water to MAX.
  5. 5Put the 1 litre container back under both outlets and confirm; the rinse runs until the tank is empty, then the machine switches off. Rinse the hot water spout and wipe it with a damp cloth.
Every number this part goes by
Retail name:
138034
Retail name:
5000-2
Retail name:
Durgol Nespresso Descaling Kit
Retail name:
Nespresso Descaling Kit
Replaces:
3035/CBU-2

Sellers list any of these; they are the same part.

About your Lattissima Pro

Nespresso coffee machine — Original. Its descaler is the Descaling Kit, 2 x 125 ml, part 5000-2.

Where the model number is: The model number is usually on a sticker on the underside or back of the machine.

For these 31 Nespresso models
Common questions
Which descaler should I use in the Nespresso Lattissima Pro?
The Nespresso Descaling Kit, 2 x 125 ml (part 5000-2).
How often should I descale my Nespresso Lattissima Pro?
Every 3 months or 300 capsules, whichever comes first, or when the machine shows its descaling alert.
Where can I buy the 5000-2 in Australia?
We track 2 Australian sellers for the 5000-2; the lowest listed price when we last checked was A$19.99 at Nespresso Australia. Prices are re-checked daily and dated on this page.
How do I descale a Nespresso Lattissima Pro?
5 steps, listed on this page with the maker's video where there is one.
How do I reset the reminder?
The descaling alert clears once the descale and rinse cycles finish. On Vertuo Next, Pop and Pop+ the cycle cannot be stopped; if the machine is unplugged it restarts in descale mode and both cycles must run again. Creatista and Lattissima models lock after a set number of drinks if the alert is ignored.

Something looks wrong with the Lattissima Pro match? . Reports go to a person, not a bot.